New Items

New Items

<< < 1 2 > >>

Showing 20 of 30

Hollow Rivets

Hollow rivets (not double sided). Caps and post are interchangeable - mix and match different sizes of caps and posts. ***Caps and posts are sold separately. Use hand press and dies (sold separately) to set rivets. 33 Cap - 7mm 34 Cap - 9mm 36 Cap - 10mm 32 Post - 6mm x 7mm 33 Short Post - 7mm x 9mm 33 Medium Post - 8mm x 9mm 33 Long Post - 8mm x 11mm 36 Short Post - 9mm x 9mm 36 Long Post - 9mm...

Part Number: I2-RIV
Rivet Dies

Use to set our hollow rivets (not double sided). Dies are size specific - when ordering, match with cap size. Post die can be used with our different sizes of posts.

Part Number: J0-Riv Die
Water Repellent Polyester Coil

Water repellent polyester zipper. PU Coated. *Cannot be made into separating/jacket zippers. Use with backwards sliders: https://www.paccana.com/product/1075/zippersliders/coilzippersliders/7-backwards-sliders-autolock or https://www.paccana.com/product/72/zippersliders/coilzippersliders/backwards-sliders-nonlock

Part Number: A1
Plastic Tri-Glides (Extra Wide)

Plastic tri-glides. Slots are wider than regular tri-glides, to use with thicker webbing. Use to adjust length of items such as animal collars, backpack straps, etc.

Part Number: I0-S022
Swivel Snap Hooks

Plastic swivel snap hooks/bolt snaps.

Part Number: I0-P337
Plastic Boltsnap with Key Ring

Plastic boltsnap with key ring. Swivel Key ring is approx. 3/4" inside diameter

Part Number: I0-S004
Plastic O-Rings

Plastic O-rings

Part Number: I0-S049
Triangle Rings

Triangle Rings The 3/8" triangles can be used with #I0-P060 (sold separately)

Part Number: I0-P012
Plastic Glove Hooks - Dual Ended

Plastic Glove hooks. Can be used with 3/8" triangle rings #I0-P012 (sold separately).

Part Number: I0-P060
Plastic Glove Hooks

Plastic glove hooks. Can be used with 3/8" triangles #I0-P012 (sold separately)

Part Number: I0-P335
Plastic Cam Buckles

Plastic cam buckles. Styles may very slightly, depending on size. 1" shown in photo.

Part Number: I0-P013
45mm Rotary Cutter w/Cushion Grip

45mm rotary cutter with cushion grip. Flexible safeguard. Includes ones blade

Part Number: D1-CH RC-16
Oval Cordlocks with 2 Slots

Oval shape cordlock with 1/4" slots - can be used to attach to garment. 5mm x 7mm hole Height 28 mm Width 15 mm Thickness 11 mm *Sizes are approximate

Part Number: I0-CLP166
Flat Cordlocks - Round

Flat, round cordlocks ***Antique Brass and Antique Silver cordlocks are metal 6mm Hole Height 26 mm Width 18 mm Thickness 6 mm *Sizes are approximate

Part Number: I0-CL099
Zipper Pull Cord End - Rounded

Zipper pull cord end attaches to thin cord (approx. 3/32" - 1/8" shockcord or 4mm cord) to make zippers easier to grab. CORD IS NOT INCLUDED

Part Number: I0-P209
Zipper Pull Cord End - Rounded (with Cord)

Zipper pull cord end with cord pre-attached! Attaches to most zipper sliders. String is approx. 4.5mm thick

Part Number: I0-P209
Zipper Pull Cord End - Flat

Zipper pull cord end attaches to thin cord (3/32" shockcord or 2mm-3mm cord) to make zippers easier to grab. CORD IS NOT INCLUDED

Part Number: I0-P139
Zipper Pull Cord End - Flat (with Cord)

Zipper pull cord end with cord pre-attached! Attaches to most zipper sliders. String is approx. 3mm thick

Part Number: I0-P139
Zipper Pull Cord End - Narrow

Zipper pull cord end attaches to thin cord (3/32" shockcord or 2mm-3mm cord) to make zippers easier to grab. CORD IS NOT INCLUDED

Part Number: I0-PU16
Buffalo Full Soles

Buffalo full soles **While supplies last. Sold by the pair

Part Number: RS3

<< < 1 2 > >>